To have the nearest Coldwater sales representatives get in touch with you,
please send your request to salesrep@coldwaterseals.com.
Overview
Suction Roll Energy Audit
Suction Rolls use a lot of power. Coldwater Tech Services (CTS) personnel based in the US
can audit your suction rolls energy
consumption and make recommendations that can save tens of thousands of dollars in wasted
power...>>
Suction Roll Training Seminar
Coldwater offers an one-day suction roll efficiency training seminar.
The training seminar should be performed at the mill with the maintenance personnel, and those who daily operate
the suction rolls, so that they understand the suction roll's function, and how it should be
operated...>>
Formation & Drainage Consultation
Coldwater Tech Services (CTS) personnel based in the US and Sweden
are always available to discuss formation improvements, increases in
drainage capacity, reduction in power consumption and a more efficient wire
section...>>
Edge & Wave Control Survey
Coldwater Tech Services (CTS) personnel based in the US and Sweden
can evaluate ways to improve edge quality and manage or eliminate waves
based on existing equipment, and make detailed recommendations for any new equipment that may be needed depending
on the customers goals. A properly used Edge Control System can help reduce sheet breaks, improve sheet quality,
and yield more saleable product...>>
Headbox Inspection Service
All manufacturers of headboxes recommend an annual inspection. It is best if the inspection occurs some months before
an extended outage so that any parts required can be obtained, inspected, and the proper planning be performed before
the longer shutdown. Coldwater Tech Services (CTS) personnel based in the US
have years of experience providing these inspections and
other headbox calibration services...>>
Vacuum Audit
A well designed and operated vacuum system for the wet end helps achieve better paper quality and reduces power
consumption. Coldwater Tech Services (CTS) personnel based in Sweden
can evaluate your vacuum capacity, sources, piping and
limitations...>>
North America +1 (404) 842-0012 / Europe +46 (0) 554-68 98 20 / Asia +86 (512) 5777-7691 info@coldwaterseals.com
